For over 70 years, TE Connectivity’s DEUTSCH connectors have proven their reliability in the most demanding environments. Our robust range of DEUTSCH products includes connectors, contacts, and accessories designed for industries such as aerospace, defence, offshore, industrial, commercial transport, and rail.
Jump to section:
Contacts for DT, HD and HDP Series
DEUTSCH DT Series Connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements and design flexibility. The DT Series offers the designer the ability to use multiple size 16 contacts, each with 13 amp continuous capacity, within a single shell.
There are two versions identified by different colours:
Note: Component parts are not inter-mountable but in the fully assembled condition, both grey and black parts are intermateable and interchangeable thus maintaining the higher levels of sealability expected within the Construction, Off-road, Heavy Goods Vehicle and Agricultural market.
Standard – 2.24mm – 3.68mm wire insulation diameter. Thin wall – 1.35mm – 3.05mm wire insulation diameter (Identified by an ‘E’ on the Seal / End Cap).
| No. of Positions | Keying | Grey Plug | Grey Plug Reduced Diameter Seals |
Grey Receptacle | Grey Receptacle Reduced Diameter Seals |
|---|---|---|---|---|---|
| 2 | – | DT06-2S-P004 | DT06-2S-C015 | DT04-2P-P004 | DT04-2P-C015 |
| 3 | – | DT06-3S-P004 | DT06-3S-C015 | DT04-3P-P004 | DT04-3P-C015 |
| 4 | – | DT06-4S-P004 | DT06-4S-C015 | DT04-4P-P004 | DT04-4P-C015 |
| 6 | – | DT06-6S-P004 | DT06-6S-C015 | DT04-6P-P004 | DT04-6P-C015 |
| 8 | Key A | DT06-08SA-P004 | DT06-08SA-C015 | DT04-08PA-P004 | DT04-08PA-C015 |
| 8 | Key B | DT06-08SB-P004 | DT06-08SB-C015 | DT04-08PB-P004 | DT04-08PB-C015 |
| 8 | Key C | DT06-08SC-P004 | DT06-08SC-C015 | DT04-08PC-P004 | DT04-08PC-C015 |
| 8 | Key D | DT06-08SD-P004 | DT06-08SD-C015 | DT04-08PD-P004 | DT04-08PD-C015 |
| 12 | Key A | DT06-12SA-P004 | DT06-12SA-C015 | DT04-12PA-P004 | DT04-12PA-C015 |
| 12 | Key B | DT06-12SB-P004 | DT06-12SB-C015 | DT04-12PB-P004 | DT04-12PB-C015 |
| 12 | Key C | DT06-12SC-P004 | DT06-12SC-C015 | DT04-12PC-P004 | DT04-12PC-C015 |
| 12 | Key D | DT06-12SD-P004 | DT06-12SD-C015 | DT04-12PD-P004 | DT04-12PD-C015 |
| No. of Positions | Keying | Black Plug | Black Plug Reduced Diameter Seals |
Black Receptacle | Black Receptacle Reduced Diameter Seals |
|---|---|---|---|---|---|
| 2 | – | DT06-2S-P012 | DT06-2S-CE06 | DT04-2P-E004 | DT04-2P-CE02 |
| 3 | – | DT06-3S-P012 | DT06-3S-CE06 | DT04-3P-E004 | DT04-3P-CE02 |
| 4 | – | DT06-4S-P012 | DT06-4S-CE06 | DT04-4P-E004 | DT04-4P-CE02 |
| 6 | – | DT06-6S-P012 | DT06-6S-CE06 | DT04-6P-E004 | DT04-6P-CE02 |
| 8 | Key A | DT06-08SA-P012 | DT06-08SA-CE06 | DT04-08PA-E004 | DT04-08PA-CE02 |
| 8 | Key B | DT06-08SB-P012 | DT06-08SB-CE06 | DT04-08PB-E004 | DT04-08PB-CE02 |
| 8 | Key C | DT06-08SC-P012 | DT06-08SC-CE06 | DT04-08PC-E004 | DT04-08PC-CE02 |
| 8 | Key D | DT06-08SD-P012 | DT06-08SD-CE06 | DT04-08PD-E004 | DT04-08PD-CE02 |
| 12 | Key A | DT06-12SA-P012 | DT06-12SA-CE06 | DT04-12PA-E004 | DT04-12PA-CE02 |
| 12 | Key B | DT06-12SB-P012 | DT06-12SB-CE06 | DT04-12PB-E004 | DT04-12PB-CE02 |
| 12 | Key C | DT06-12SC-P012 | DT06-12SC-CE06 | DT04-12PC-E004 | DT04-12PC-CE02 |
| 12 | Key D | DT06-12SD-P012 | DT06-12SD-CE06 | DT04-12PD-E004 | DT04-12PD-CE02 |
| No. of Positions |
Grey Receptacle Welded flange |
Grey Receptacle Reduced Diameter Seals |
Black Receptacle Welded flange |
Black Receptacle Reduced Diameter Seals |
|---|---|---|---|---|
| 3 | DT04-3P-L012 | DT04-3P-CL03 | DT04-3P-LE14 | DT04-3P-CL06 |
| 4 | DT04-4P-L012 | DT04-4P-CL03 | DT04-4P-LE14 | DT04-4P-CL06 |
| 6* | DTP04-6P-L012 | DT04-6P CL03 | DT04-6P-LE14 | DT04-6P-CL06 |
| 8 | DT04-08P-L012 | DT04-8P-CL03 | DT04-8P-LE14 | DT04-8P-CL06 |
| 12 | DT04-12P-L012 | DT04-12P-CL03 | DT04-12P-LE14 | DT04-12P-CL06 |
The DT Flanged Receptacle Series of sealed connectors is available in grey and black with standard or thin wall wire seals. Designed to simplify wire routing and assembly, DT Series receptacles are available in many mounting configurations and styles. Each receptacle requires a secondary contact lock – e.g. W3P through to W12P coloured green.
Wire Sealing Range
Standard – 2.24mm – 3.68mm wire insulation diameter
Thin wall – 1.35mm – 3.05mm wire insulation diameter
*Note: Contact Sales Office for 6 Way Drawing
To meet the application requirements where wires are to be protected, the DT Series maybe supplied with boot adaptors. These will accept shaped boots / sleeves or shrink tubing. Parts for standard or thin wall wire are available.
Wire Sealing Range Standard – 2.24mm – 3.68mm wire insulation diameter
Thin wall – 1.35mm – 3.05mm wire insulation diameter
| No. of Positions |
Grey Plug Shrink Boot Adapter |
Black Plug Shrink Boot Adapter |
Grey Plug Reduced Diameter Seals |
Black Plug Reduced Diameter Seals |
Grey Receptacle Shrink Boot Adapter |
Black Receptacle Shrink Boot Adapter |
Grey Receptacle Reduced Diameter Seals |
Black Receptacle Reduced Diameter Seals |
|---|---|---|---|---|---|---|---|---|
| 2 | DT06-2S-E008 | DT06-2S-EP11 | DT06-2S-CE04 | DT06-2S-CE13 | DT04-2P-E008 | DT04-2P-EE01 | DT04-2P-CE04 | DT04-2P-CE09 |
| 3 | DT06-3S-E008 | DT06-3S-EP11 | DT06-3S-CE04 | DT06-3S-CE13 | DT04-3P-E008 | DT04-3P-EE01 | DT04-3P-CE04 | DT04-3P-CE09 |
| 4 | DT06-4S-E008 | DT06-4S-EP11 | DT06-4S-CE04 | DT06-4S-CE13 | DT04-4P-E008 | DT04-4P-EE01 | DT04-4P-CE04 | DT04-4P-CE09 |
| 8 | DT06-8S-E008 | DT06-8S-EP11 | DT06-8S-CE04 | DT06-8S-CE13 | DT04-8P-E008 | DT04-8P-EE01 | DT04-8P-CE04 | DT04-8P-CE09 |
| 12 | DT06-12S-E008 | DT06-12S-EP11 | DT06-12S-CE04 | DT06-12S-CE13 | DT04-12P-E008 | DT04-12P-EE01 | DT04-12P-CE04 | DT04-12P-CE09 |
DEUTSCH DTM Series Connectors offer solutions to your smaller wire gauge applications. Building on the DT design strengths, the DTM connector line was developed to fill the need for lower amperage, multi-pin connectors. The DTM Series offers the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell.
Wire Sealing Range Standard – 1.35mm – 3.05mm wire insulation diameter
| No. of Positions | Keying | Plug | Receptacle |
|---|---|---|---|
| 2 | – | DTM06-2S | DTM04-2P |
| 3 | – | DTM06-3S | DTM04-3P |
| 4 | – | DTM06-4S | DTM04-4P |
| 6 | – | DTM06-6S | DTM04-6P |
| 8 | Key A | DTM06-08SA | DTM04-08PA |
| 8 | Key B | DTM06-08SB | DTM04-08PB |
| 8 | Key C | DTM06-08SC | DTM04-08PC |
| 8 | Key D | DTM06-08SD | DTM04-08PD |
| 12 | Key A | DTM06-12SA | DTM04-12PA |
| 12 | Key B | DTM06-12SB | DTM04-12PB |
| 12 | Key C | DTM06-12SC | DTM04-12PC |
| 12 | Key D | DTM06-12SD | DTM04-12PD |
DEUTSCH DTP Series Connectors provide solutions for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin connectors.
The DTP Series offers the designer the ability to use multiple size 12 contacts, each with 25 amp continuous capacity, within a single shell. The DTP connectors are currently available in two and four pin configurations.
| No. of Positions |
Plug | Plug Reduced Diameter Seals |
Receptacle | Receptacle Reduced Diameter Seals |
|---|---|---|---|---|
| 2 | DTP06-2S | DTP06-2S-C015 | DTP04-2P | DTP04-2P-C015 |
| 4 | DTP06-4S | DTP06-4S-C015 | DTP04-4P | DTP04-4P-C015 |
| Size | Pin | Socket | Wire Size AWG (mm2 ) |
Recommended Strip Inches (mm) |
Min. Contact Retention |
Ref Crimp Tensile Lbs. (N) |
Max Rated Amps at 125°C Continuous |
|---|---|---|---|---|---|---|---|
| 20 | 0460-202-20** | 0462-201-20** | 20 (0.50) |
.156-.218 (3.96-5.54) |
20 (89) |
20 (89) |
7.5 |
| 20 | 0460-010-20** | 0462-005-20** | 16-18 (1.0-0.75) |
.156-.218 (3.96-5.54) |
20 (89) |
20 (89) |
7.5 |
| 16 | 0460-202-16** | 0462-201-16** | 16-20 (1.5-0.50) |
.250-.312 (6.35-7.92) |
25 (111) |
35-20 (156-89) |
13 |
| 16 | 0460-215-16** | 0462-209-16** | 14 (2.0) |
.250-.312 (6.35-7.92) |
25 (111) |
70 (311) |
13 |
| 12 | 0460-204-12** | 0462-203-12** | 12-14 (3.0-2.0) |
.222-.284 (5.64-7.21) |
30 (134) |
75-70 (334-311) |
25 |
| 8 | 0460-204-08** | 0462-203-08** | 8-10 (10.0-5.0) |
.430-.492 (10.92-12.50) |
35 (156) |
125-90 (556-400) |
60 |
| 4 | 0460-204-04** | 0462-203-04** | 6 (16.0-13.0) |
.430-.492 (10.92-12.50) |
35 (156) |
300 (1334) |
100 |
| 4 (C038) | 5960-203-04141 | 59602-203-04141 | 4 (25.0-21.0) |
.430-.492 (10.92-12.50) |
35 (156) |
300 (1334) |
100 |
** = Plating codes
| Part Number Suffix | Plating Material |
|---|---|
| 31 | Gold |
| 90 | Nickel (size 4 pin only) |
| 141 | Nickel |
Stamped and Formed Contacts are also available
 |
W2S* | Wedgelock for 2 Way plug
*A, B, C, D keying available |
| W2S-P012* | ||
 |
W3S* | Wedgelock for 3 Way plug
*J1939 keying available |
| W3S-P012* | ||
 |
W4S* | Wedgelock for 4 Way plug
*A, B, C, D keying available |
| W4S-P012* | ||
 |
W6S | Wedgelock for 6 Way plug |
| W6S-P012 | ||
 |
W8S | Wedgelock for 8 Way plug |
| W8S-P012 | ||
 |
W12S | Wedgelock for 12 Way plug |
| W12S-P012 |
 |
W2P* | Wedgelock for 2 Way receptacle *A, B, C, D keying available |
 |
W3P* | Wedgelock for 3 Way receptacle *J1939 keying available |
 |
W4P* | Wedgelock for 4 Way receptacle *A, B, C, D keying available |
 |
W6P | Wedgelock for 6 Way receptacle |
 |
W8P | Wedgelock for 8 Way receptacle |
 |
W12P | Wedgelock for 12 Way receptacle |
 |
WM-2S* | Wedgelock for 2 Way plug *A, B, C keying available |
 |
WM-3S | Wedgelock for 3 Way plug |
 |
WM-4S | Wedgelock for 4 Way plug |
 |
WM-6S | Wedgelock for 6 Way plug |
 |
WM-8S | Wedgelock for 8 Way plug |
 |
WM-12S | Wedgelock for 8 Way plug |
 |
WM-2P* | Wedgelock for 2 Way receptacle *A, B, C keying available |
 |
WM-3P | Wedgelock for 3 Way receptacle |
 |
WM-4P | Wedgelock for 4 Way receptacle |
 |
WM-6P | Wedgelock for 6 Way receptacle |
 |
WM-8P | Wedgelock for 8 Way receptacle |
 |
WM-12P | Wedgelock for 12 Way receptacle |
 |
WP-2S | Wedgelock for 2 Way plug |
 |
WP-4S | Wedgelock for 3 Way plug |
 |
WP-2P | Wedgelock for 2 Way receptacle |
 |
WP-4P | Wedgelock for 3 Way receptacle |
The DEUTSCH DT and DTM Series Backshells are designed to snap onto and mate with all standard (basic plug and receptacles without modifications that affect the rear of the connector) DT and DTM Series connectors. The rigid, durable backshells offer a high level of protection and allow convoluted tubing to nest within the rear of the backshell. Straight (180°) and right angle (90°) versions and backshells with strain relief for jacketed cable are also available.
Since the backshells are designed to work with the standard DT and DTM connectors, tests should be conducted for fit and function of a backshell being used on any part with a modification.
| Connector | Style | Strain Relief | Tubing Size (mm) | Part Number |
| DT04-2P | 180° | 6, 7.5, 8.5, and 10 | 1011-229-0205 | |
| 180° | X | 6, 7.5, 8.5, and 10 | 1011-257-0205 | |
| 90° | 6, 7.5, 8.5, and 10 | 1011-230-0205 | ||
| 90° | X | 6, 7.5, 8.5, and 10 | 1011-258-0205 | |
| DT04-3P | 180° | 6, 7.5, 8.5, and 10 | 1011-233-0305 | |
| 180° | X | 6, 7.5, 8.5, and 10 | 1011-261-0305 | |
| 90° | 6, 7.5, 8.5, and 10 | 1011-234-0305 | ||
| 90° | X | 6, 7.5, 8.5, and 10 | 1011-262-0305 | |
| DT04-4P | 180° | 6, 7.5, 8.5, and 10 | 1011-237-0405 | |
| 180° | X | 6, 7.5, 8.5, and 10 | 1011-265-0405 | |
| 90° | 6, 7.5, 8.5, and 10 | 1011-238-0405 | ||
| 90° | X | 6, 7.5, 8.5, and 10 | 1011-266-0405 | |
| DT04-6P | 180° | 8.5, 10, and 13 | 1011-241-0605 | |
| 180° | X | 8.5, 10, and 13 | 1011-269-0605 | |
| 90° | 8.5, 10, and 13 | 1011-242-0605 | ||
| 90° | X | 8.5, 10, and 13 | 1011-270-0605 | |
| DT04-08P* | 180° | 8.5, 10, and 13 | 1011-245-0805 | |
| 90° | 8.5, 10, and 13 | 1011-246-0805 | ||
| DT04-12P* | 180° | 10, 13, and 17 | 1011-249-1205 | |
| 90° | 10, 13, and 17 | 1011-250-1205 |
| Connector | Style | Strain Relief | Tubing Size (mm) | Part Number |
| DT06-2S | 180° | 6, 7.5, 8.5, and 10 | 1011-227-0205 | |
| 180° | X | 6, 7.5, 8.5, and 10 | 1011-255-0205 | |
| 90° | 6, 7.5, 8.5, and 10 | 1011-228-0205 | ||
| 90° | X | 6, 7.5, 8.5, and 10 | 1011-256-0205 | |
| DT06-3S | 180° | 6, 7.5, 8.5, and 10 | 1011-231-0305 | |
| 180° | X | 6, 7.5, 8.5, and 10 | 1011-259-0305 | |
| 90° | 6, 7.5, 8.5, and 10 | 1011-232-0305 | ||
| 90° | X | 6, 7.5, 8.5, and 10 | 1011-260-0305 | |
| DT06-4S | 180° | 6, 7.5, 8.5, and 10 | 1011-235-0405 | |
| 180° | X | 6, 7.5, 8.5, and 10 | 1011-263-0405 | |
| 90° | 6, 7.5, 8.5, and 10 | 1011-236-0405 | ||
| 90° | X | 6, 7.5, 8.5, and 10 | 1011-264-0405 | |
| DT06-6S | 180° | 8.5, 10, and 13 | 1011-239-0605 | |
| 180° | X | 8.5, 10, and 13 | 1011-267-0605 | |
| 90° | 8.5, 10, and 13 | 1011-240-0605 | ||
| 90° | X | 8.5, 10, and 13 | 1011-268-0605 | |
| DT06-08S* | 180° | 8.5, 10, and 13 | 1011-243-0805 | |
| 90° | 8.5, 10, and 13 | 1011-244-0805 | ||
| DT06-12S* | 180° | 10, 13, and 17 | 1011-247-1205 | |
| 90° | 10, 13, and 17 | 1011-248-1205 | ||
| DT06-12S*-**** | 180° | 13 and 17 | 1028-043-1205 |
| Connector | Style | Tubing Size (mm) | Part Number |
|---|---|---|---|
| DTM*04-2P | 180° | 7.5 and 8.5 | 1028-021-0205 |
| DTM06-2S | 180° | 7.5 and 8.5 | 1011-273-0205 |
| DTM*06-2S | 180° | 8.5 | 1028-041-0205 |
| DTM*04-3P | 180° | 8.5 | 1028-024-0305 |
| DTM*06-3S | 180° | 8.5 | 1028-005-0305 |
| DTM*04-4P | 180° | 8.5 | 1028-027-0405 |
| DTM*06-4S | 180° | 8.5 | 1028-008-0405 |
| DTM06-6S | 180° | 10 and 13 | 1028-011-0605 |
| DTM06-08S* | 180° | 10 and 13 | 1028-013-0805 |
| DTM04-12P* | 180° | 13 and 17 | 1028-034-1205 |
| DTM06-12S* | 180° | 13 and 17 | 1028-015-1205 |
| Adapter for 2, 3, and 4 pin |
90° | 7.5 and 8.5 | 1028-016-0005 |
| Adapter for 6 and 8 pin | 90° | 10 and 13 | 1028-017-0005 |
* A, B, C, D and E keying options
Note: 1028-043-1205 backshell is designed to fit on 12 Way plugs with modifications
DTHD connectors are single terminal connectors for heavy duty applications. Easy to install, environmentally sealed and compact in size, they are a simple, field serviceable alternative to a splice.
DTHD connectors are available in three sizes, carry 25 to 100 ampsvand can be mounted or used in-line.
| No. of Positions | Contact Size | Plug | Receptacle |
|---|---|---|---|
| 1 | 12 | DTHD06-1-12S | DTHD04-1-12P |
| 1 | 8 | DTHD06-1-8S | DTHD04-1-8P |
| 1 | 4 | DTHD06-1-4S | DTHD04-1-4P |
The HD10 Series is an environmentally sealed, thermoplastic and cylindrical connector series. With arrangements from 3 to 9 cavities, HD10 connectors accept size 4, 12, or 16 contacts and are available either in-line or flanged. HD10 connectors are heavily used for diagnostic applications and are available with or without a coupling ring.
| No. of positions | Contact Size | Rear Threads | Plug | Receptacle In-line | Receptacle Flange |
| 3 | 16 | No | HD16-3-16S | HD14-3-16P | – |
| Yes | HD16-3-96S | HD14-3-96P | HD10-3-96P | ||
| 4 | 4/16 | Yes | HD16-4-4S | – | HD10-4-4P |
| 5 | 16 | No | HD16-5-16S | HD14-5-16P | HD10-5-16P |
| 6 | 16 | Yes | HD16-6-96S | HD14-6-96P | HD10-6-96P |
| 6 | 12 | Yes | HD16-6-12S-B010 | HD14-6-12P | HD10-6-12P |
| 9 | 16 | No | HD16-9-16S | HD14-9-16P | HD10-9-16P |
| Yes | HD16-9-96S | HD14-9-96P | HD10-9-96P | ||
| 9 (1939) | 16 | Yes | HD16-9-1939S | HD14-9-1939P | HD10-9-1939P |
Designed specifically for the truck, bus and off-highway industry, the HD30 and HDP20 Series are heavy duty, environmentally sealed, multi-pin circular connectors. Available in metal or thermoplastic housings, these connectors offer multiple pin configurations that accept contact sizes 4 through to 20.
The HD30 is a metal shell while the HDP20 Series shells are thermoplastic. Both feature quick connect-disconnect bayonet coupling, single hole bulkhead mounting, silicone seals and a rear insertion/rear removal contact system.
| HD30 Metal Shell |  |
HDP20 Thermoplastic Shell |  |
| Shell Size Position | Series | Plug Standard Diameter Seal | Receptacle Standard Diameter Seal | Plug Reduced Diameter Seal | Receptacle Reduced Diameter Seal |
| 18-6 | HDP20 | HDP26-18-6SN | HDP24-18-6PN | HDP26-18-6SE | HDP24-18-6PE |
| HD30 | HD36-18-6SN | HD34-18-6PN | HD36-18-6SE | HD34-18-6PE | |
| 18-8 | HDP20 | HDP26-18-8SN | HDP24-18-8PN | HDP26-18-8SE | HDP24-18-8PE |
| HD30 | HD36-18-8SN | HD34-18-8PN | HD36-18-8SE | HD34-18-8PE | |
| 18-14 | HDP20 | HDP26-18-14SN | HDP24-18-14PN | HDP26-18-14SE | HDP24-18-14PE |
| HD30 | HD36-18-14SN | HD34-18-14PN | HD36-18-14SE | HD34-18-14PE | |
| 18-20 | HDP20 | HDP26-18-20SN | HDP24-18-20PN | HDP26-18-20SE | HDP24-18-20PE |
| HD30 | HD36-18-20SN | HD34-18-20PN | HD36-18-20SE | HD34-18-20PE | |
| 18-21 | HDP20 | HDP26-18-21SN | HDP24-18-21PN | HDP26-18-21SE | HDP24-18-21PE |
| HD30 | HD36-18-21SN | HD34-18-21PN | HD36-18-21SE | HD34-18-21PE | |
| 27-7 | HDP20 | HDP26-24-7SN | HDP24-24-7PN | HDP26-24-7SE | HDP24-24-7PE |
| HD30 | HD36-24-7SN | HD34-24-7PN | HD36-24-7SE | HD34-24-7PE | |
| 24-91- P064 | HDP20 | HDP26-24- 91SN-P064 | HDP24-24- 91PN-P064 | – | – |
| 24-9 | HDP20 | HDP26-24-9SN | HDP24-24-9PN | HDP26-24-9SE | HDP24-24-9PE |
| HD30 | HD36-24-9SN | HD34-24-9PN | HD36-24-9SE | HD34-24-9PE | |
| 24-14 | HDP20 | HDP26-24-14SN | HDP24-24-14PN | HDP26-24-14SE | HDP24-24-14PE |
| HD30 | HD36-24-14SN | HD34-24-14PN | HD36-24-14SE | HD34-24-14PE | |
| 24-16 | HDP20 | HDP26-24-16SN | HDP24-24-16PN | HDP26-24-16SE | HDP24-24-16PE |
| HD30 | HD36-24-16SN | HD34-24-16PN | HD36-24-16SE | HD34-24-16PE | |
| 24-18 | HDP20 | HDP26-24-18SN | HDP24-24-18PN | HDP26-24-18SE | HDP24-24-18PE |
| HD30 | HD36-24-18SN | HD34-24-18PN | HD36-24-18SE | HD34-24-18PE | |
| 24-19 | HDP20 | HDP26-24-19SN | HDP24-24-19PN | HDP26-24-19SE | HDP24-24-19PE |
| HD30 | HD36-24-19SN | HD34-24-19PN | HD36-24-19SE | HD34-24-19PE | |
| 24-21 | HDP20 | HDP26-24-21SN | HDP24-24-21PN | HDP26-24-21SE | HDP24-24-21PE |
| HD30 | HD36-24-21SN | HD34-24-21PN | HD36-24-21SE | HD34-24-21PE | |
| 24-23 | HDP20 | HDP26-24-23SN | HDP24-24-23PN | HDP26-24-23SE | HDP24-24-23PE |
| HD30 | HD36-24-23SN | HD34-24-23PN | HD36-24-23SE | HD34-24-23PE | |
| 24-29 | HDP20 | HDP26-24-29SN | HDP24-24-29PN | HDP26-24-29SE | HDP24-24-29PE |
| HD30 | HD36-24-29SN | HD34-24-29PN | HD36-24-29SE | HD34-24-29PE | |
| 24-31 | HDP20 | HDP26-24-31SN | HDP24-24-31PN | HDP26-24-31SE | HDP24-24-31PE |
| HD30 | HD36-24-31SN | HD34-24-31PN | HD36-24-31SE | HD34-24-31PE | |
| 24-33 | HDP20 | HDP26-24-33SN | HDP24-24-33PN | HDP26-24-33SE | HDP24-24-33PE |
| HD30 | HD36-24-33SN | HD34-24-33PN | HD36-24-33SE | HD34-24-33PE | |
| 24-35 | HDP20 | HDP26-24-35SN | HDP24-24-35PN | HDP26-24-35SE | HDP24-24-35PE |
| HD30 | HD36-24-35SN | HD34-24-35PN | HD36-24-35SE | HD34-24-35PE | |
| 24-47 | HDP20 | HDP26-24-47SN | HDP24-24-47PN | HDP26-24-47SE | HDP24-24-47PE |
| HD30 | HD36-24-47SN | HD34-24-47PN | HD36-24-47SE |
HD34-24-47PE |
† Special modifications are available upon request
†Requires size 4 contact part numbers, 5960-203-04**(pin) and 5962-203-04**(socket)
‡Without P064 modification, plug cavities 4 and 5 are internally connected
For field service, prototype, and low-volume production, HDT-48-00, is a universal hand crimp tool for Deutsch solid contacts sizes 12, 16 and 20. It provides a symmetrical four indent crimp, is compact and easy-to-use for field service, yet sturdy and reliable enough for low volume production.
| Part Number | HDT-48-00 |
|---|---|
| HD30 Series HDP20 Series DRC Series HD10 Series DT Series DTM Series DTP Series DTHD Series DRB Series DTV Series AEC Series STRIKE Series Jiffy Splice |
|
| Solid/Stamped and Formed | Solid |
| Contact Size | 12, 16, 20 |
| Solid Contacts | Yes |
 |
 |
 |
 |
 |
 |
 |
|
| Part Number | 0411-027-0405 | 0411-353-0805 | 0411-337-1205 | 0411-291-1405 | 0411-310-1605 | 0411-336-1605 | 0411-240-2005 |
| Series | HD30 Series HDP20 Series |
HD30 Series HDP20 Series DTHD Series |
HD30 Series HDP20 Series HD10 Series |
HD30 Series HDP20 Series HD10 Series DRC Series AEC Series Jiffy Splice |
HD30 Series HDP20 Series HD10 Series DRC Series AEC Series Jiffy Splice |
HD30 Series HDP20 Series HD10 Series DRC Series AEC Series |
HD30 Series HDP20 Series DRC Series |
| Wire Size | 4 | 8, 10 | 12, 14 | 14, 16 | 16, 18 | 16, 18 | 20, 22 |
| Keyed | No | No | No | No | No | No | No |
| Colour | Black | Green | Orange | Green | Light Blue | Dark Blue | Red |
| Material | Plastic | Plastic | Plastic | Plastic | Plastic | Plastic | Plastic |
| Contact Size | 4 | 8 | 12 | 16 | 16 | 16 | 20 |
| Seal Size | Standard | Standard | E-seal | Standard | Standard | E-seal | Standard |
The rugged LEAVYSEAL Connectors are multi-pin and accept multiple wire sizes. LEAVYSEAL products utilize a lever lock system for mating and are available in several mounting styles and keying options. The housings come in six sizes and feature an integrated cable attachment.
| No. of Positions | Keying | Housing Colour | Part Numbers | ||
| Receptacle Housing | In-line/Flange Tab Housing | PCB Tab Housing | |||
| 15 | A | Black | 1-1534126-1 | 1703799-1 | – |
| B | Natural | 2-1534126-1 | – | – | |
| C | Blue | 3-1534126-1 | – | – | |
| 18 | A | Black | 1823440-2* | 1-1823448-2* | – |
| 21 | A | Black | 1-1534127-1 | 1-2112162-1 (flange) | 1534238-1 (straight) |
| 1-2208688-1* | |||||
| B | Natural | 2-1534127-1 | 2-2112162-1 | – | |
| C | Blue | 3-1534127-1 | 3-2112162-1 | – | |
| D | Violet | 4-1534127-1 | 4-2112162-1 | – | |
| 22 | A | Black | 1-1823440-3* | 1-1823449-1* | – |
| B | Grey | 2-1823440-3* | 2-1823449-1* | – | |
| C | Blue | 3-1823440-3* | – | – | |
| D | Green | 4-1823440-3* | – | – | |
| 26 | A | Black | 1-2112035-1* | 1-2112041-1* | – |
| 1-2112041-2* | |||||
| 29 | A | Black | 1-1823402-1* | – | – |
| B | Grey | 2-1823402-1* | – | – | |
| C | Blue | 3-1823402-1* | – | – | |
| 31 | A | Bordeaux | 1-1564297-6 | – | – |
| 1-2208685-6* | |||||
| 39 | E | Emerald Green | 5-1718321-3 | 5-1718323-1 | 5-1418363-1 (straight) |
| 5-2208684-3* | 5-1418363-3 (90°) | ||||
| F | Fawn Brown | 6-1718321-3 | 6-1718323-1 | – | |
| 6-2208684-3* | |||||
| 46 | A | Black | 1-2112231-1 | – | – |
| 62 | A | Black | 1-1418883-1 | 1-1718324-1 | 1-1418362-1(straight) |
| 1-1418362-3 (90° | |||||
| 1-1823498-1* | – | – | |||
| B | Grey | 2-1418883-1 | 2-1718324-1 | 2-1418362-1 (straight) | |
| 2-1418362-3 (90° | |||||
| 2-1823498-1* | – | – | |||
| C | Blue | 3-1418883-1 | 3-1718324-1 | – | |
| 3-1823498-1* | – | – | |||
| D | Green | 4-1418883-1 | – | – | |
| 4-1823498-1* | – | – | |||
| 92 | A | Black | 1-703998-1 (NW 26 wire exit) | – | 1-1452228-9 (straight) |
| 3-1703998-1 (NW 29 wire exit) | |||||
| B | Black | 4-1703998-1 (NW 29 wire exit) | – | – | |
| C | Black | 5-1703998-1 (NW 29 wire exit) | – | – | |
*V0 rated material
| Size | Strip Form | Loose Piece | Wire Size (mm²) | Insulation Diameter (mm) FLR | Finish |
| 1.5K | 969028 | 969029 | 0.2-0.5 | 1.2-1.6 | -2/-3 |
| 964269 | 964270 | 0.5-1.0 | 1.4-2.1 | -2/-3/-5 | |
| 1703278 | 1703279 | 1.5 | 1.9-2.4 | -2/-5 | |
| 2.8 | 965982 | 965983 | 0.2-0.5 | max 2.1 | 1-xxx-1 1-xxx-3 |
| 962915 | 963748 | 0.5-1.0 | max 2.1 | 1-xxx-1 1-xxx-2 1-xxx-3 2-xxx-1 2-xxx-2 2-xxx-3 | |
| 962916 | 963749 | 1.5-2.5 | max 3.0 | 1-xxx-1 1-xxx-2 1-xxx-3 2-xxx-1 2-xxx-2 2-xxx-3 | |
| 1719504 | 1719503 | 12 TXL | max 3.2 | 1-xxx-1 1-xxx-2 | |
| 6.3/ 4.8K | 962917 | 963742 | 0.5-1.0 | 1.4-2.1 | 1-xxx-1 1-xxx-2 2-xxx-1 2-xxx-2 |
| 962918 | 963743 | 1.5-2.5 | 2.2-3.0 | 1-xxx-1 1-xxx-2 2-xxx-1 2-xxx-2 | |
| 962919 | 963744 | >2.5-4.0 | 2.7-3.7 | 1-xxx-1 1-xxx-2 2-xxx-1 2-xxx-2 |
| Size | Strip Form | Loose Piece | Wire Size (mm²) | Insulation Diameter (mm) FLK | Insulation Diameter (mm) FLR | Finish |
| 1.5K | 1564324 | 1564325 | 0.2-0.5 | – | 1.1-1.4 | -1/-2/-3 |
| 1241380 | 1241381 | 0.5-1.0 | – | 1.4-2.1 | -1/-2/-3 1-xxx-2* | |
| 1418884 | 1418885 | >1.0-1.5 | – | 2.2-2.4 | -1/-3 | |
| 2.8 | 968882 | 968896 | 0.35 | – | 1.2-1.4 | 1-xxx-1 1-xxx-3 |
| 968855 | 968875 | 0.5-1.0 | – | 1.4-2.1 | 1-xxx-1 1-xxx-2 1-xxx-3 | |
| 968857 | 968876 | >1.0-2.5 | – | 2.2-3.0 | 1-xxx-1 1-xxx-3 | |
| 6.3/ 4.8K | 1241410 | 1241411 | 0.35-0.5 | 1.3-2.3 | 1.2-1.6 | -1/-3 |
| 1241412 | 1241413 | 0.5-1.0 | 2.0-2.7 | 1.4-2.1 | -1/-3 | |
| 1241414 | 1241415 | 0.35-0.5 | 2.7-3.7 | 2.2-3.0 | -1/-3 | |
| 1241416 | 1241417 | >2.5-4.0 | 4.1-4.5 | 3.4-3.7 | -1/-3 | |
| 1241418 | 1241419 | 4.0-6.0 | – | 3.4-4.3 | -4 1-xxx-3 2-xxx-3 |
The AMPSEAL 16 Connector System is targeted for off-road, heavy duty industrial, recreational and agricultural applications. This wire-to-wire and wire-to-device connector line was designed to meet the rigorous demands of an industry that requires the highest standards in performance. The AMPSEAL 16 receptacle and pin housings come fully assembled, offering a one-piece approach for applied cost savings. Both housings feature integral wire seals, wire seal covers and primary latch reinforcement (PLR).
| Sealed Receptacle Housings | Sealed Cap Housings |
|---|---|
 |
 |
| No. of positions | Keying | Colour | Receptacle Housing Standard Diameter Sea | Cap Standard Diameter Seal | Receptacle Housing Reduced Diameter Seal | Cap Reduced Diameter Sea |
| 2 | A | Red | 776427-1 | 776428-1 | 776522-1 | 776534-1 |
| B | Grey | 776427-2 | 776428-2 | 776522-2 | 776534-2 | |
| C | Yellow | 776427-3 | 776428-3 | 776522-3 | 776534-3 | |
| D | Green | 776427-4 | 776428-4 | 776522-4 | 776534-4 | |
| 3 | A | Red | 776429-1 | 776430-1 | 776523-1 | 776535-1 |
| B | Grey | 776429-2 | 776430-2 | 776523-2 | 776535-2 | |
| C | Yellow | 776429-3 | 776430-3 | 776523-3 | 776535-3 | |
| D | Green | 776429-4 | 776430-4 | 776523-4 | 776535-4 | |
| 4 | A | Red | 776487-1 | 776488-1 | 776524-1 | 776536-1 |
| B | Grey | 776487-2 | 776488-2 | 776524-2 | 776536-2 | |
| C | Yellow | 776487-3 | 776488-3 | 776524-3 | 776536-3 | |
| D | Green | 776487-4 | 776488-4 | 776524-4 | 776536-4 | |
| 6 | A | Red | 776433-1 | 776434-1 | 776531-1 | 776537-1 |
| B | Grey | 776433-2 | 776434-2 | 776531-2 | 776537-2 | |
| C | Yellow | 776433-3 | 776434-3 | 776531-3 | 776537-3 | |
| 8 | A | Red | 776494-1 | 776495-1 | 776532-1 | 776538-1 |
| B | Grey | 776494-2 | 776495-2 | 776532-2 | 776538-2 | |
| C | Yellow | 776494-3 | 776495-3 | 776532-3 | 776538-3 | |
| D | Green | 776494-4 | 776495-4 | 776532-4 | 776538-4 | |
| 12 | A | Red | 776437-1 | 776438-1 | 776533-1 | 776539-1 |
| B | Grey | 776437-2 | 776438-2 | 776533-2 | 776539-2 | |
| C | Yellow | 776437-3 | 776438-3 | 776533-3 | 776539-3 | |
| D | Green | 776437-4 | 776438-4 | 776533-4 | 776539-4 |
AMPSEAL 16 and AMPSEAL 16 hybrid lever connectors commonly use the HDSF size 16 contact system. The contacts are round, stamped and formed contacts with dual beam sockets.
| Size | Pin | Receptacle | Wire Size AWG (mm²) | Insulation Diameter (mm) | Wire Insulation Support | Finish | ||
| Strip Form | Loose Piece | Strip Form | Loose Piece | |||||
| HDSF 16 | 1924463-1 | 1924579-1 | 1924464-1 | 1924580-1 | 18-20 (0.8-0.5) | .107-.05 (2.72-1.27) | Yes | Gold |
| 1924463-3 | 1924579-3 | 1924464-2 | 1924580-2 | Nickel | ||||
| 776349-1 | – | 776493-1 | – | 18-20 (0.8-0.5) | .131-.089 (3.33-2.26) | Yes | Gold | |
| 776349-3 | – | 776493-2 | – | Nickel | ||||
| 638078-1 | 776300-1 | 776492-1 | 776299-1 | 14-18 (2.0-0.8) | .131-.089 (3.33-2.26) | Yes | Gold | |
| 638078-3 | 776300-2 | 776492-2 | 776299-2 | Nickel | ||||
| 638112-1 | 776298-1 | 776491-1 | 776297-1 | 14-18 (2.0-0.8) | .155-.077 (3.94-1.96) | No | Gold | |
| 638112-3 | 776298-2 | 776491-2 | 776297-2 | Nickel | ||||
| 2098250-1 | – | 2098251-1 | – | 18 (1.5-0.8) | .118-.065 (3.00-1.65) | Yes | Gold | |
| 2098250-3 | – | 2098251-2 | – | Nickel | ||||
| 2098252-1 | – | 2098253-1 | – | 14 (2.0-1.5) | .128-.083 (3.25-2.10) | Yes | Gold | |
| 2098252-3 | – | 2098253-2 | – | Nickel | ||||
Open cavities provide pathways for contaminates to enter the connectors. To maintain seal integrity, any unused cavity must be filled with the appropriate size sealing plug.
| Colour | Part Number | Contact Size | Wire Gauge Range | Description |
|---|---|---|---|---|
| Yellow | 776363-1 | Size 16 | 16-20 AWG | PBT, used with AMPSEAL 16 (standard diameter cavities) |
| White | 776364-1 | Size 20 | 16-20 AWG | PBT, used with AMPSEAL 16 (reduced diameter cavities) |
TE Connectivity has developed the AMP SUPERSEAL 1.5 Series Connector family to meet the increasing requirements for reliability and waterproof-ability. AMP SUPERSEAL 1.5 Series Connector exceed the requirements prescribed by IP67 according IEC 60529 and DIN 40050-9 standards and is designed for automotive, agriculture and industrial machinery applications.
| No. of Positions | Dimension (mm) | Part Number |
|---|---|---|
| 1 | 9.3 | 282079-2 |
| 2 | 15.3 | 282080-1 |
| 3 | 21.3 | 282087-1 |
| 4 | 27.3 | 282088-1 |
| 5 | 33.3 | 282089-1 |
| 6 | 39.3 | 282090-1 |
| No. of Positions | Dimension (mm) | Part Number |
|---|---|---|
| 1 | 13.8 | 282103-1 |
| 2 | 19.8 | 282104-1 |
| 3 | 25.8 | 282105-1 |
| 4 | 31.8 | 282106-1 |
| 5 | 37.8 | 282107-1 |
| 6 | 43.8 | 282108-1 |
| No. of Positions | Connector Housing Part Number | Description | Colour | Rubber Boot Part Number |
| 2 | 282080-1 | Plug Housing | Black | 880810-1 |
| 282104-1 | Cap Housing | |||
| 3 | 282087-1 | Plug Housing | 880811-2 | |
| Insulation Diameter (mm) | Colour | Part Number |
|---|---|---|
| 1.2 – 1.6 | Green | 281934-4 |
| 1.7 – 2.4 | Yellow | 281934-2 |
| 2.5 – 3.3 | Red | 281934-3 |
| Cavity Plug | Red | 282081-1 |
| Pin | Receptacle | Wire Size AWG (mm²) | Insulation Diameter (mm) | ||
| Strip Form | Loose Piece | Strip Form | Loose Piece | ||
| 282404-1 | 183036-1 | 282403-1 | 183035-1 | 0.3-0.5 [22-20] | 1.4-1.7 [.055-.067] |
| 282109-1 | 183024-1 | 282110-1 | 183025-1 | 0.5-1.5 [20-16] | 1.8-3.3 [.071-.130] |
| 282465-1 | – | 282466-1 | – | 1.5-2.5 [16-14] | 1.8-3.3 [.071-.130] |
The Heavy Duty Sealed Connector Series (HDSCS) offers several cavity arrangements and mixed wire sizes. The rugged, thermoplastic connectors have a secondary lock with poke-yoke feature and can be used for in-line or flange mount applications. HDSCS connectors are available in five housing sizes and four keying options.
| No. of Positions | Group | Contact Size | Keying Colour | Receptacle Housing | Flange Tab Housing | Tab Housing Without Flange |
| 2 | A | 2.8 | Black | 1-1418483-1 | 1-1703841-1 | 1-1703839-1 |
| Grey | 2-1418483-1 | 2-1703841-1 | 2-1703839-1 | |||
| Green | 3-1418483-1 | 3-1703841-1 | 3-1703839-1 | |||
| Blue | 4-1418483-1 | 4-1703841-1 | 4-1703839-1 | |||
| (3) 2 | A | 1.5K | Black | 1-1418448-2 | – | – |
| Grey | 2-1418448-2 | – | – | |||
| Green | 3-1418448-2 | – | – | |||
| Blue | 4-1418448-2 | – | – | |||
| 2 | C | 6.3 | Black | 1-1564542-1 | 1-1564546-1 | 1-1564544-1 |
| Grey | 2-1564542-1 | 2-1564546-1 | 2-1564544-1 | |||
| Green | 3-1564542-1 | 3-1564546-1 | 3-1564544-1 | |||
| Blue | 4-1564542-1 | 4-1564546-1 | 4-1564544-1 | |||
| 3 | A | 6.3 | Black | 1-1418448-1 | 1-1703843-1 | 1-1670730-1 |
| Grey | 2-1418448-1 | 2-1703843-1 | 2-1670730-1 | |||
| Green | 3-1418448-1 | 3-1703843-1 | 3-1670730-1 | |||
| Blue | 4-1418448-1 | 4-1703843-1 | 4-1670730-1 | |||
| 4 | B | 2.8 | Black | 1-1418390-1 | 1-1703808-1 | 1-1703818-1 |
| Grey | 2-1418390-1 | 2-1703808-1 | 2-1703818-1 | |||
| Green | 3-1418390-1 | 3-1703808-1 | 3-1703818-1 | |||
| Blue | 4-1418390-1 | 4-1703808-1 | 4-1703818-1 | |||
| E | 6.3 | Black | 1-1564330-1 | – | 1-1564534-1 | |
| Grey | 2-1564330-1 | – | 2-1564534-1 | |||
| Green | 3-1564330-1 | – | 3-1564534-1 | |||
| Blue | 4-1564330-1 | – | 4-1564534-1 | |||
| 6 | B | 1.5K | Black | 1-1418469-1 | 1-1703820-1 | 1-1703773-1 |
| Grey | 2-1418469-1 | 2-1703820-1 | 2-1703773-1 | |||
| Green | 3-1418469-1 | 3-1703820-1 | 3-1703773-1 | |||
| Blue | 4-1418469-1 | 4-1703820-1 | 4-1703773-1 | |||
| C | 2.8 | Black | 1-1418437-1 | – | – | |
| Grey | 2-1418437-1 | – | – | |||
| Green | 3-1418437-1 | – | – | |||
| Blue | 4-1418437-1 | – | – | |||
| 7 | C | (4) 1.5K (3) 2.8 | Black | 1-1418480-1 | 1-1670214-1 | 1-1703648-1 |
| Grey | 2-1418480-1 | 2-1670214-1 | 2-1703648-1 | |||
| Green | 3-1418480-1 | 3-1670214-1 | 3-1703648-1 | |||
| Blue | 4-1418480-1 | 4-1670214-1 | 4-1703648-1 | |||
| 8 | C | 1.5K | Black | 1-1418479-1 | 1-1564416-1 | 1-1564512-1 |
| Grey | 2-1418479-1 | 2-1564416-1 | 2-1564512-1 | |||
| Green | 3-1418479-1 | 3-1564416-1 | 3-1564512-1 | |||
| Blue | 4-1418479-1 | 4-1564416-1 | 4-1564512-1 | |||
| D | 2.8 | Black | 1-1670894-1 | – | 1-1564522-1 | |
| Grey | 2-1670894-1 | – | 2-1564522-1 | |||
| Green | 3-1670894-1 | – | 3-1564522-1 | |||
| Blue | 4-1670894-1 | – | 4-1564522-1 | |||
| 10 | D | (6) 1.5K (4) 2.8 | Black | 1-1564514-1 | 1-1564518-1 | 1-1564516-1 |
| Grey | 2-1564514-1 | 2-1564518-1 | 2-1564516-1 | |||
| Green | 3-1564514-1 | 3-1564518-1 | 3-1564516-1 | |||
| Blue | 4-1564514-1 | 4-1564518-1 | 4-1564516-1 | |||
| 12 | D | 1.5K | Black | 1-1703639-1 | 1-1564520-1 | 1-1564414-1 |
| Grey | 2-1703639-1 | 2-1564520-1 | 2-1564414-1 | |||
| Green | 3-1703639-1 | 3-1564520-1 | 3-1564414-1 | |||
| Blue | 4-1703639-1 | 4-1564520-1 | 4-1564414-1 | |||
| E | 2.8 | Black | 1-1670901-1 | – | – | |
| Grey | 2-1670901-1 | – | – | |||
| Green | 3-1670901-1 | – | – | |||
| Blue | 4-1670901-1 | – | – | |||
| 15 | E | (9) 1.5K (6) 2.8 | Black | 1-1563878-1 | 1-1564532-1 | 1-1564530-1 |
| Grey | 2-1563878-1 | 2-1564532-1 | 2-1564530-1 | |||
| Green | 3-1563878-1 | 3-1564532-1 | 3-1564530-1 | |||
| Blue | 4-1563878-1 | 4-1564532-1 | 4-1564530-1 | |||
| 16 | E | (12) 1.5K (4) 2.8 | Black | 1-1564337-1 | 1-1564407-1 | 1-1564528-1 |
| Grey | 2-1564337-1 | 2-1564407-1 | 2-1564528-1 | |||
| Green | 3-1564337-1 | 3-1564407-1 | 3-1564528-1 | |||
| Blue | 4-1564337-1 | 4-1564407-1 | 4-1564528-1 | |||
| 18 | E | 1.5K | Black | 1-1563759-1 | 1-1564526-1 | 1-1564412-1 |
| Grey | 2-1563759-1 | 2-1564526-1 | 2-1564412-1 | |||
| Green | 3-1563759-1 | 3-1564526-1 | 3-1564412-1 | |||
| Blue | 4-1563759-1 | 4-1564526-1 | 4-1564412-1 |
| Size | Strip Form | Loose Piece | Wire Size (mm²) | Insulation Diameter (mm) FLR | Finish |
| 1.5K | 969028 | 969029 | 0.2-0.5 | 1.2-1.6 | -2/-3 |
| 964269 | 964270 | 0.5-1.0 | 1.4-2.1 | -2/-3/-5 | |
| 1703278 | 1703279 | 1.5 | 1.9-2.4 | -2/-5 | |
| 2.8 | 965982 | 965983 | 0.2-0.5 | max 2.1 | 1-xxx-1 1-xxx-3 |
| 962915 | 963748 | 0.5-1.0 | max 2.1 | 1-xxx-1 1-xxx-2 1-xxx-3 2-xxx-1 2-xxx-2 2-xxx-3 | |
| 962916 | 963749 | 1.5-2.5 | max 3.0 | 1-xxx-1 1-xxx-2 1-xxx-3 2-xxx-1 2-xxx-2 2-xxx-3 | |
| 1719504 | 1719503 | 12 TXL | max 3.2 | 1-xxx-1 1-xxx-2 | |
| 6.3/ 4.8K | 962917 | 963742 | 0.5-1.0 | 1.4-2.1 | 1-xxx-1 1-xxx-2 2-xxx-1 2-xxx-2 |
| 962918 | 963743 | 1.5-2.5 | 2.2-3.0 | 1-xxx-1 1-xxx-2 2-xxx-1 2-xxx-2 | |
| 962919 | 963744 | >2.5-4.0 | 2.7-3.7 | 1-xxx-1 1-xxx-2 2-xxx-1 2-xxx-2 |
| Contact Size | Insulation
Diameter (mm) |
Colour | Part Number |
| 1.5K | 0.9-1.2 | Green | 1718705-1 |
| 1.2-1.6 | Red | 964971-1 | |
| Blue | 1394133-1 | ||
| 1.4-1.9 | Grey | 963530-1 | |
| 1.9-2.1 | Yellow | 964972-1 | |
| 1.9-2.4 | Orange | 2112323-1 | |
| 2.8 | 1.2-2.1 | Blue | 828904-1 |
| 828904-2 | |||
| 2.2-3.0 | White | 828905-1 | |
| 6.3/4.8K | 1.4-2.0 | Yellow | 2177018-1 |
| 2.0-2.7 | White | 1394511-1 | |
| 2.7-2.9 | Red brown | 1823111-1 | |
| 3.4-3.7 | Blue | 1394512-1 | |
| 4.0-4.5 | Green | 1719043-1 |
| Contact Size | Wire Size | Colour | Part Number |
| 1.5K | 3.6 mm | White | 963531-1 |
| Natural | 1394132-1 | ||
| 2.8 | 5.6 mm | Natural | 828922-1 |
| Green | 828922-2 | ||
| 6.3/4.8K | 8.5 mm | Transparent | 967652-1 |
| Size | Strip Form | Loose Piece | Wire Size (mm² ) | Insulation Diameter (mm) FLK | Insulation Diameter (mm) FLR | Finish |
| 1.5K | 1564324 | 1564325 | 0.2-0.5 | – | 1.1-1.4 | -1/-2/-3 |
| 1241380 | 1241381 | 0.5-1.0 | – | 1.4-2.1 | -1/-2/-3
1-xxx-2* |
|
| 1418884 | 1418885 | >1.0-1.5 | – | 2.2-2.4 | -1/-3 | |
| 2.8 | 968882 | 968896 | 0.35 | – | 1.2-1.4 | 1-xxx-1
1-xxx-3 |
| 968855 | 968875 | 0.5-1.0 | – | 1.4-2.1 | 1-xxx-1
1-xxx-2 1-xxx-3 |
|
| 968857 | 968876 | >1.0-2.5 | – | 2.2-3.0 | 1-xxx-1
1-xxx-3 |
|
| 6.3/ 4.8K | 1241410 | 1241411 | 0.35-0.5 | 1.3-2.3 | 1.2-1.6 | -1/-3 |
| 1241412 | 1241413 | 0.5-1.0 | 2.0-2.7 | 1.4-2.1 | -1/-3 | |
| 1241414 | 1241415 | 0.35-0.5 | 2.7-3.7 | 2.2-3.0 | -1/-3 | |
| 1241416 | 1241417 | >2.5-4.0 | 4.1-4.5 | 3.4-3.7 | -1/-3 | |
| 1241418 | 1241419 | 4.0-6.0 | – | 3.4-4.3 | -4
1-xxx-3 2-xxx-3 |
| Finish Code | Material |
|---|---|
| -1 | CuNiSi, pre-tin plated |
| -2 | CuNiSi, selective gold plated |
| -3 | CuNiSi, selective silver plated |
| -4 | CuNiSi, tin-silver pre-plated |
| 1-xxx-1 | CuNiSi, pre-tin plated |
| 1-xxx-2 | CuNiSi, selective gold plated |
| 1-xxx-2* | CuNiSi, min 1.27 µm selective gold plated |
| 1-xxx-3 | CuNiSi, selective silver plated |
TE Connectivity (TE) has developed a complete modular hard wired box family called MFINITY. The MFINITY Fuse and Relay Box offer limitless combinations with various modules, easily assembled into a complete power distribution panel, without any tooling cost.
Upon request, TE are able to design and manufacture custom modules, wire dress, frames or covers to meet specific customer requirements. With its proven technology, the MFINITY Fuse and Relay Box offers flexible, off the shelf products targeting low volume customers to create their own configurations.
Dalroad makes every effort to maintain the accuracy and quality of the information provided within this guide. However, all information, unless stated otherwise, cannot be guaranteed. The information contained in this guide is for general guidance only. Dalroad assumes no legal liability or responsibility for the accuracy or completeness of the information provided. You should neither act, nor refrain from action, on the basis of any such information. In no case will Dalroad be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of TE Connectivity / DEUTSCH products supplied by Dalroad. All users of products distributed by Dalroad should make their own evaluation to determine whether the products that Dalroad supply are suitable for your specific applications. The copyright of all content on this catalogue is owned by Dalroad and/or TE Connectivity. TE Connectivity, DEUTSCH and TE connectivity (logo) are trademarks.
